2x Front Wheel Hub Bearing Assembly For 04-08 Toyota Prius Hatchback 1.5L 513265

Description

Item Description:
Item Features
Condition:New
Placement on Vehicle：Driver Side or Passenger Side
Material:steel
Fitment type:Direct replacement
Weight:12LB
Warranty:1 Year
Fits either LH (Driver Side) or RH (Passenger Side) FRONT
Fits 5 Lugs Wheels
?
Vehicle Fitment
Fits Toyota Prius 2004-2009
Item Include
2x wheel hub bearing
When do you need to replace
2x Front Wheel Hub Bearing Assembly For 04-08 Toyota Prius Hatchback 1.5L 513265
Item Description:
Item Features
Condition:New
Placement on Vehicle：Driver Side or Passenger Side
Material:steel
Fitment type:Direct replacement
Weight:12LB
Warranty:1 Year
Fits either
LH (Driver Side) or RH (Passenger Side) FRONT
Fits 5 Lugs Wheels
?
Vehicle Fitment
Fits Toyota Prius 2004-2009
Item Include
2x
wheel hub bearing
When do you need to replace
Poor Clicking, snapping or popping
Clunking or knocking
Rumbling, humming or growling
Wobble and/or wheel vibrations
Shimmy, shudder, or vibration at constant speeds
Abnormal side pulling when applying brakes
Uneven or abnormal tire wear
ABS failure
How to Install
1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
?
Note
If you have any question about the product, please contact us before buying, we will give you a best reply in time.
We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.
Item Specifics
Brand
autosuperstar
Manufacturer Part Number
10057379
Placement on Vehicle
Front,Rear
OE/OEM Part Number
513265
Type
Wheel Hub & Bearing Assembly
Vintage Car Part
No
Condition
New
Interchange Part Number
4351047010, 4351047011
Bolt Circle Diameter
3.89 inch
Brake Pilot Diameter
2.145 inch
Flange Offset
1.64 inch
Items Included
2pc wheel bearing
Manufacturer Warranty
1 Year
Material
Steel
Performance Part
No
Superseded Part Number
4351047012
Universal Fitment
No
Wheel Pilot Diameter
2.11 inch
Flange Diameter
4.88 inch
Hub Pilot Diameter
3.04 inch
Suface
Polished, Rust Protected
Payment
We only accept payment through PayPal.
Shipping
1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.
2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.
3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.
Policy
1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).
2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.
3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
Contact Us
If there's any question or problem, do contact us
please
. Our
Customer Servicers
are always here to answer the question and solve the problem.
Note
Please
DO check
the
compatible chart
before placing orders to make sure it fits your vehicle.
If there's any question about the conpatibilities, contact us please.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Towing Mirrors
2 pcs Wheel Spacers
Wheel Hub Bearing
Heater Core
4 pcs Wheel Spacers
Door Handle
Windshield Wiper Motor
Fuel Pump
Air Parking Heater
Window Regulator
Throttle Body
Window Switch
AC Compressor
ABS Wheel Speed Sensor
Roof Rack
Window Visor
AC Condenser
Bumper
4 pcs Wheel hub Bearing
Tonneau Cover
Sun Visor
A/C Evaporator Core
Spoiler Wing
Headlights Assembly
Fuel Injector
Dash Cover
Oil Pan
Fender Flares
Center Console
Timing Belt Kit
Timing Chain Kit
Door Lock Actuator
AC Vent
Electric Winch Tow
Other
Hot Item
RIGHT Passenger Tan Beige Sun Visor W/O vanity light For Toyota Camry 2007-2011
USD 28.52
2 PCS Door Handle Black Inside Left & Right Side For Chevrolet C1500 PICKUP
USD 25.36
4 pcs1.5" 8x6.5 to 8x180 8 Lug Wheel Spacers Adapter For CHEVY For GMC
USD 125.11
Universal 6 Volt Electric Fuel Pump Carbureted Inline w/ Installation Kit E8011
USD 26.99
Complete Chrome Rear Bumper Car Assembly For Toyota Tacoma 1995-2004
USD 176.99
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
FL & FR Door Lock Actuators w/ Window Master Switch Regulator For Ford Explorer
USD 125.99
2 pcs 2" Thick 5x5 1/2" Studs Black Wheel Spacers For Jeep Wrangler Commander
USD 64.39
2 pcs Front RH Outside & Inside Door Handles For Honda Accord 1998 - 2002
USD 16.01
2 pcs 1.25" Wheel Spacers Adapters 5x4.75 to 5x4.5 For GMC Sonoma For Chevrolet
USD 46.91
Rear Inner Left Interior Driver Side Door Handle For Toyota Corolla 1998-2002
USD 8.89
2x Front Wheel Hub Bearing Assembly For 04-08 Toyota Prius Hatchback 1.5L 513265
Item Description:
Item Features
Condition:New
Placement on Vehicle：Driver Side or Passenger Side
Material:steel
Fitment type:Direct replacement
Weight:12LB
Warranty:1 Year
Fits either
LH (Driver Side) or RH (Passenger Side) FRONT
Fits 5 Lugs Wheels
?
Vehicle Fitment
Fits Toyota Prius 2004-2009
Item Include
2x
wheel hub bearing
When do you need to replace
Poor Clicking, snapping or popping
Clunking or knocking
Rumbling, humming or growling
Wobble and/or wheel vibrations
Shimmy, shudder, or vibration at constant speeds
Abnormal side pulling when applying brakes
Uneven or abnormal tire wear
ABS failure
How to Install
1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
?
Note
If you have any question about the product, please contact us before buying, we will give you a best reply in time.
We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.
Payment
Shipping
Policy
Contact Us
Note
We only accept payment through PayPal.
1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.
2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.
3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.
1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).
2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.
3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
If there's any question or problem, do contact us
please
. Our
Customer Servicers
are always here to answer the question and solve the problem.
Please
DO check
the
compatible chart
before placing orders to make sure it fits your vehicle.
If there's any question about the conpatibilities, contact us please.
All rights reserved.