-40%

Pair Rear Wheel Bearing Hub Assembly Fits Mazda 3?Sport 2014 2015-2016 W/ABS

$ 37.21

Availability: 68 in stock
  • Flange Diameter: 5.41 In
  • Manufacturer Part Number: ECCPP821869
  • Wheel Pilot Diameter: 2.61 In
  • Brand: ECCPP
  • Bolt Circle Diameter: 4.46 In
  • Brake Pilot Diameter: 2.6481 In
  • Condition: New
  • Type: Wheel Hub & Bearing Assembly
  • Flange Bolt Hole qty: 4
  • Manufacturer Warranty: 1 Year
  • Placement on Vehicle: Driver Side or Passenger Side Rear
  • Hub Pilot Diameter: 3.23 In
  • Material: steel
  • Package include: 2 X wheel bearing
  • Flange Offset: 2.22 In
  • Fitment: For Mazda
  • Fitment type: Direct replacement
  • Finish: Polished, Rust Protected
  • Flange Shape: Rectangle
  • Interchange Part Number: 512523 wheel bearings(2Pcs)
  • ABS Sensor: Has ABS with tegral Sensor
  • Bolt Quantity: 5
  • Other Part Number: B45A2615X
  • Weight: 14LB

    Description

    Product Features:
    * Fits either LH (Driver Side) or RH (Passenger Side) Rear  * Fits 5 Lugs Wheels  * Wheel studs already installed  * Includes ABS with tegral Sensor
    Item Description:
    Brand New Wheel Hub Assembly
    Direct replacement
    Built to strict quality control standards
    Replaces dealer part numbers: 512523,WA512523,WB512523,712523,29512523
    Vehicle Fitment:
    Fits Mazda 3 Sport 2014-2016
    Fits Mazda 3 2014-2016
    Package Include:
    2 Pcs wheel hub bearing
    Pair Rear Wheel Bearing Hub Assembly Fits Mazda 3?Sport 2014 2015-2016 W/ABS
    Product Features:
    *
    Fits either
    LH (Driver Side) or RH (Passenger Side) Rear
    *
    Fits 5 Lugs Wheels
    *
    Wheel studs already installed
    * Includes ABS with tegral Sensor
    Item Description:
    Brand New Wheel Hub Assembly
    Direct replacement
    Built to strict quality control standards
    Replaces dealer part numbers
    :
    512523,WA512523,WB512523,712523,29512523
    Vehicle Fitment:
    Fits Mazda 3 Sport 2014-2016
    Fits Mazda 3 2014-2016
    Package Include:
    2 Pcs wheel hub bearing
    1 Year Warranty
    Exploded View:
    Wheel hub and bearing
    Cotter pin
    Nut retainer
    Wheel hub lock nut
    Hub bolt
    Splash guard
    Steering knuckle
    Removal:
    Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    Remove the engine side cover.
    Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    Remove the wheel hub and bearing bolts using power tool.
    Remove the splash guard and the wheel hub and bearing from the steering knuckle.
    NOTE:
    Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    Pull out the front wheel sensor, being careful to turn it as little as possible.
    Do not pull on wheel sensorharness.
    Inspection after removel : Check components for deformation
    y,
    cracks
    y,
    and other damage
    y,
    and  boots of transverse link ball joint for cracks
    y,
    axial end play,and swing torque.
    Installation:
    Installation is in the reverse order of the removal
    Caution:
    Do not reuse the wheel stud.
    Do not reuse the cotter pin.
    Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
    8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
    ?
    Item Specifics
    Placement on Vehicle
    Driver Side or Passenger Side Rear
    Interchange Part Number
    512523 wheel bearings(2Pcs)
    Fitment
    For Mazda
    ABS Sensor
    Has ABS with tegral Sensor
    Brand
    ECCPP
    Warranty
    1 Year
    Surface Finish
    Polished, Rust Protected
    Bolt Quantity
    5
    Flange Bolt Hole qty
    4
    Manufacturer Part Number
    ECCPP821869
    Spline Quantity
    N/A
    Bolt Circle Diameter
    4.46 In
    Wheel Pilot Diameter
    2.61 In
    Brake Pilot Diameter
    2.6481 In
    Flange Diameter
    5.41 In
    Flange Shape
    Rectangle
    Flange Offset
    2.22 In
    Hub Pilot Diameter
    3.23 In
    Other Part Number
    B45A2615X
    Material
    steel
    Fitment type
    Direct replacement
    Weight
    14LB
    Package include
    2 X wheel bearing
    Type
    Wheel Hub & Bearing Assembly
    Item Specifics
    Placement on Vehicle
    Driver Side or Passenger Side Rear
    Interchange Part Number
    512523 wheel bearings(2Pcs)
    Fitment
    For Mazda
    ABS Sensor
    Has ABS with tegral Sensor
    Brand
    ECCPP
    Warranty
    1 Year
    Surface Finish
    Polished, Rust Protected
    Bolt Quantity
    5
    Flange Bolt Hole qty
    4
    Manufacturer Part Number
    ECCPP821869
    Spline Quantity
    N/A
    Bolt Circle Diameter
    4.46 In
    Wheel Pilot Diameter
    2.61 In
    Brake Pilot Diameter
    2.6481 In
    Flange Diameter
    5.41 In
    Flange Shape
    Rectangle
    Flange Offset
    2.22 In
    Hub Pilot Diameter
    3.23 In
    Other Part Number
    B45A2615X
    Material
    steel
    Fitment type
    Direct replacement
    Weight
    14LB
    Package include
    2 X wheel bearing
    Type
    Wheel Hub & Bearing Assembly
    WARNING
    :
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    We stand behind every product we sell.
    All of our brand new items come with a
    60-Days
    money-back guarantee.
    We define the item as defective only if it doesn't function as described.
    It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
    We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by  abuse or wrong operation is not covered by this warranty.
    No  product liability insurance is assumed.
    PayPal preferred.
    Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute  will be filed with eBay.

    Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most  of countries.
    All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    International Buyers a€“ Please Note:
    a) Import duties, taxes and  charges are not included in the item price or shipping charges. These  charges are the buyer's responsibility.
    b) Please check with your  country's customs office to determine what these additional costs will  be prior to bidding.
    Serious Buyer Only! Please place  bid or "Buy it now" only if you agree the price and terms of the product  and no argument after the auction.

    We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any  other Intellectual Property Rights, please contact us. We will remove any offending listing immediately while awaiting further discussion.
    Picture
    Hot Item
    Pair Front Or Rear Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Venture
    USD 63.24
    2 For Ford F150 Excursion Ranger 1998 1999 2000-2010 Remote Keyless Entry System
    USD 7.99
    Front Or Rear Wheel Bearing Hub For Buick Rendezvous Lesabre Chevrolet Impala
    USD 42.89
    Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors
    USD 132.99
    For 1988-98 Chevy GMC 1500/2500/3500 Towing Manual Side View Mirrors Truck Pair
    USD 72.99
    Shop Category
    Store Home
    Outer Parts
    ◈  Towing Mirrors
    ◈  Roof Rack
    ◈  Bumper
    ◈  Tonneau Cover
    ◈  Lift Support
    ◈  Pillar Posts
    ◈  Rubber Seal Strip
    ◈  Jeep Parts
    ◈  Windshields
    ◈  Door Lock Actuator
    ◈  Handlebar Riser
    ◈  Window Regulator
    ◈  Door Handle Covers
    ◈  Car Hinges
    ◈  License Plate Frames
    ◈  Rocker Pannel & Cover Trim
    ◈  Car Cover
    ◈  Door Handle
    ◈  Mud Flaps
    ◈  Parking Sensor
    ◈  RV & Golf Power Cord
    ◈  Window Louver Cover
    ◈  Nerf Bars And Running Boards
    ◈  Cable
    ◈  Horn
    ◈  Hub Caps
    ◈  Fender Flares
    ◈  Tire Cover
    ◈  Motorcycle Wheel Chock
    ◈  Kick Start Lever
    ◈  Car Antenna
    ◈  Front Bumper Lip
    ◈  Stone & Bug Deflector
    ◈  Front Bumper Lip Splitter Stru
    ◈  Window Visor
    ◈  Air Intake Snorkel
    ◈  AC Vent
    ◈  Spoiler Wing
    ◈  Wheel Rim
    Sensor Series
    ◈  Oxygen Sensor
    ◈  ABS Wheel Speed Sensor
    ◈  Knock Sensor
    ◈  Brake Pad Wear Sensor
    ◈  Vehicle Speed Sensor
    ◈  Sensor
    ◈  Tire Pressure Sensor
    Light products
    ◈  Headlight Assembly
    ◈  Motorcycle Light
    ◈  Fog Light
    ◈  Side/Cab Marker Lights
    ◈  Instrument Panel Lights
    ◈  Third Brake Lights
    ◈  Interior Lights
    ◈  Exterior Lights
    ◈  Led Headlights
    ◈  Special Model Lights
    Inner Parts
    ◈  Shift Knob Lever Head
    ◈  Car Floor Mats
    ◈  Remote Key
    ◈  Steering Wheel & Adapter
    ◈  Anti Theft Lock
    ◈  Center Console
    ◈  Window Tint Film
    ◈  Fastener
    ◈  Air Cleaner Box Assembly
    ◈  Car Window Film Tint Tools
    ◈  Car Seat Cover
    ◈  Dash Cover & Cushion
    ◈  Cargo Cover
    ◈  Sun Visor
    ◈  Seat Bottom Cushion
    Suspension System
    ◈  ATV Tires
    ◈  A Arm Bushing Kit
    ◈  Coilover
    ◈  Strut Mount
    ◈  Shocks Struts
    ◈  Complete Strut
    ◈  Struts & Suspension Kit & Hubs
    ◈  Air Suspension
    ◈  Leveling Lift Kits
    ▷  Suspension Kits
    ♢  Control Arm
    ♢  Ball Joints
    ♢  Tie Rod End
    ♢  Sway Bar
    ♢  Suspension kit
    ◈  Drop Spindle Lowering Kit
    ◈  Steering Knuckle
    ◈  leveling kit + struts shocks
    Copper Tube
    ◈  ATV Brake Master Cylinder
    ◈  ATV Brake Caliper
    ◈  Brake drum shoe
    ◈  Clutch Lever
    ◈  Parking Brake Actuator
    ◈  Brake rotor pad
    ◈  Brake Shoe
    ◈  Brake lines kit
    ◈  Electric Vacuum Pump
    ◈  Brake caliper
    ◈  Power Brake Booster
    Drive Shaft And Half Shaft
    ◈  Rear Wheel Axle
    ◈  Driveshaft
    ◈  Wheel Spacers
    ◈  C Notch & Flip Kit
    ◈  Wheel Hub Bearing
    ◈  Wheel Hub Centric Rings
    ◈  Wheel Hub Bearing Knuckle
    ◈  CV Axle
    ◈  CV Axle Boot
    ◈  4 Pcs Wheel Hub Bearing
    Steering System
    ◈  Steering U Joint
    ◈  Power Steering Pump & Parts
    ◈  Power Steering Rack
    ◈  Steering Shaft
    Time Control System
    ◈  Timing Belt Kit
    ◈  Variable Valve Timing Solenoid
    ◈  Timing Chain Kit
    Cooling System
    ◈  Water Pump
    ◈  Transmission Oil Cooler
    ◈  Blower Motor Resistor
    ◈  Thermostat Housing
    ◈  AC Compressor
    ◈  Condenser
    ◈  Cooling Fan
    ◈  Heater Control Valve
    ◈  Heater Core
    ◈  Coolant Tank
    ◈  Water Pump Impeller
    ◈  Radiator
    ◈  Radiator Hose
    ◈  Radiator Support
    ◈  Evaporator
    ◈  Air Blend Door Actuator
    Gas Distribution System
    ◈  Throttle Body
    ◈  Diesel Emissions Fluid Pump
    ◈  Valve Cover
    ◈  Hydraulic Lifter & Rocker Arms
    ◈  Turbocharger Cartridge Core
    ◈  Turbocharger
    ◈  Idle Air Control Valve
    ◈  Secondary Air Pump
    Ignition System
    ◈  Fuse Box
    ◈  Ignition Distributor
    ◈  Ignition Coils
    ◈  Spark Plug Wire Set
    ◈  ATV Ignition Coil
    ◈  Wiring Harness
    ◈  Glow Plugs
    Starting System
    ◈  Starter
    ◈  Hood Latch Lock
    Drive Belt And Device
    ◈  Wear Ring
    ◈  Primary Drive Clutch
    ◈  Serpentine Belt Tensioner
    Crankshaft And Camshaft
    ◈  Harmonic Banlancer
    ◈  Camshaft & Crankshaft
    ◈  Timing Chain Kit
    Fuel System
    ◈  Motorcycle Carburetor & Parts
    ◈  Mass Air Flow Sensor
    ◈  Fuel Injectors
    ◈  Car Carburetor
    ◈  Fuel Pump Assembly
    ◈  Oil Fuel Hose
    ◈  Fuel Tank Valve & Regulator
    ◈  Purge Valve
    ◈  Gas Can Spout
    ◈  Fuel Cell Gas Tank
    ◈  Fuel Tank Pipe & Cap
    ◈  Vacuum Pump
    Switches And Electrical
    ◈  CDI Box
    ◈  Proportioning Valve
    ◈  Window Switch
    ◈  Stator
    ◈  Battery Switch Relay
    ◈  Relay Solenoid
    ◈  Alternator Bracket Kit
    ◈  Golf Cart Parts
    ◈  Alternator
    ◈  Air Suspension Valve Solenoid
    ◈  Switch Panel
    ◈  ATV Ignition Switch
    ◈  Running Board Motor
    ◈  Trailer Adapter
    ◈  Wiring Harness
    ◈  Tilt Trim Motor
    ◈  AC Compressor Control Valve
    ◈  Remote Control Box
    ◈  Windshield Wiper Motor
    ◈  Oil Pressure Gauge
    ◈  Ballast Module
    ◈  Voltage Rectifier Regulator
    ◈  Shutdown Solenoid
    Lubrication System
    ◈  Oil Pump
    ◈  Engine Oil Cooler
    ◈  Oil Pan
    ◈  Dipstick
    Engine Bracket Glue
    ◈  Engine Mount
    Engine Gasket & Cylinder Head
    ◈  Boat Jack Plate
    ◈  Head Gasket Set
    ◈  Cylinder Head
    ◈  Cylinder Piston Gasket Kit
    ◈  Carbon Seal
    New List Item
    1.5" Front Leveling Kit & Struts Shocks Fits Dodge Ram 1500 2500 3500 2WD 94-01
    USD 142.40
    For Nissan Rogue 2014 2015 2016 Remote Keyless Entry System 3 Buttons
    USD 25.73
    2X 3" Front Leveling Lift Kit Silver & 4X Struts Shocks Fits Dodge Ram 1500 2WD
    USD 155.71
    2 For Mini Cooper 2006 2007 2008 2009 2010 2011-2013 Remote Keyless Entry System
    USD 51.99
    10pcs for 2013 2014 Audi RS5 S4 S5 Keyless Entry Smart Remote Uncut Key Fob
    USD 140.29
    Pair Rear Wheel Bearing Hub Assembly Fits Mazda 3?Sport 2014 2015-2016 W/ABS
    Product Features:
    *
    Fits either
    LH (Driver Side) or RH (Passenger Side) Rear
    *
    Fits 5 Lugs Wheels
    *
    Wheel studs already installed
    * Includes ABS with tegral Sensor
    Item Description:
    Brand New Wheel Hub Assembly
    Direct replacement
    Built to strict quality control standards
    Replaces dealer part numbers
    :
    512523,WA512523,WB512523,712523,29512523
    Vehicle Fitment:
    Fits Mazda 3 Sport 2014-2016
    Fits Mazda 3 2014-2016
    Package Include:
    2 Pcs wheel hub bearing
    1 Year Warranty
    Exploded View:
    Wheel hub and bearing
    Cotter pin
    Nut retainer
    Wheel hub lock nut
    Hub bolt
    Splash guard
    Steering knuckle
    Removal:
    Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    Remove the engine side cover.
    Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    Remove the wheel hub and bearing bolts using power tool.
    Remove the splash guard and the wheel hub and bearing from the steering knuckle.
    NOTE:
    Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    Pull out the front wheel sensor, being careful to turn it as little as possible.
    Do not pull on wheel sensorharness.
    Inspection after removel : Check components for deformation
    y,
    cracks
    y,
    and other damage
    y,
    and  boots of transverse link ball joint for cracks
    y,
    axial end play,and swing torque.
    Installation:
    Installation is in the reverse order of the removal
    Caution:
    Do not reuse the wheel stud.
    Do not reuse the cotter pin.
    Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
    8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
    ?
    Item Specifics
    Placement on Vehicle :
    Driver Side or Passenger Side Rear
    Interchange Part Number :
    512523 wheel bearings(2Pcs)
    Fitment :
    For Mazda
    ABS Sensor :
    Has ABS with tegral Sensor
    Brand :
    ECCPP
    Warranty :
    1 Year
    Surface Finish :
    Polished, Rust Protected
    Bolt Quantity :
    5
    Flange Bolt Hole qty :
    4
    Manufacturer Part Number :
    ECCPP821869
    Spline Quantity :
    N/A
    Bolt Circle Diameter :
    4.46 In
    Wheel Pilot Diameter :
    2.61 In
    Brake Pilot Diameter :
    2.6481 In
    Flange Diameter :
    5.41 In
    Flange Shape :
    Rectangle
    Flange Offset :
    2.22 In
    Hub Pilot Diameter :
    3.23 In
    Other Part Number :
    B45A2615X
    Material :
    steel
    Fitment type :
    Direct replacement
    Weight :
    14LB
    Package include :
    2 X wheel bearing
    Type :
    Wheel Hub & Bearing Assembly
    Item Specifics
    Placement on Vehicle
    Driver Side or Passenger Side Rear
    Interchange Part Number
    512523 wheel bearings(2Pcs)
    Fitment
    For Mazda
    ABS Sensor
    Has ABS with tegral Sensor
    Brand
    ECCPP
    Warranty
    1 Year
    Surface Finish
    Polished, Rust Protected
    Bolt Quantity
    5
    Flange Bolt Hole qty
    4
    Manufacturer Part Number
    ECCPP821869
    Spline Quantity
    N/A
    Bolt Circle Diameter
    4.46 In
    Wheel Pilot Diameter
    2.61 In
    Brake Pilot Diameter
    2.6481 In
    Flange Diameter
    5.41 In
    Flange Shape
    Rectangle
    Flange Offset
    2.22 In
    Hub Pilot Diameter
    3.23 In
    Other Part Number
    B45A2615X
    Material
    steel
    Fitment type
    Direct replacement
    Weight
    14LB
    Package include
    2 X wheel bearing
    Type
    Wheel Hub & Bearing Assembly
    WARNING
    :
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    We stand behind every product we sell.
    All of our brand new items come with a
    60-Days
    money-back guarantee.
    We define the item as defective only if it doesn't function as described.
    It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
    We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by  abuse or wrong operation is not covered by this warranty.
    No  product liability insurance is assumed.
    PayPal preferred.
    Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute  will be filed with eBay.

    Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most  of countries.
    All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    International Buyers a€“ Please Note:
    a) Import duties, taxes and  charges are not included in the item price or shipping charges. These  charges are the buyer's responsibility.
    b) Please check with your  country's customs office to determine what these additional costs will  be prior to bidding.
    Serious Buyer Only! Please place  bid or "Buy it now" only if you agree the price and terms of the product  and no argument after the auction.

    We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any  other Intellectual Property Rights, please contact us. We will remove any offending listing immediately while awaiting further discussion.
    Copyright of eccppautoparts. All rights reserved.